UJK Pocket Hole Screws 4mm x 60mm - Coarse Thread Routing Power Source - Choice of

Power Source - Choice of 240V 50Hz Single Phase 15AMP PLUG or 415V Three Phase

while the low-profile design allows the clamp to be positioned through the holes and channels of the MFT or inserted into the lower T-slot of Festool FS Guide Rails

Place the Knot Filler Saver on a metal surface or use masking tape on the bottom to close the holes

which have a scale and a movable indicator to show the angle

For refreshing or maintaining oiled wood surfaces – such as furniture

UJK Pocket Hole Screws 4mm x 60mm - Coarse Thread Routing Power Source - Choice ofPocket hole joinery is all about making strong joints that are fast and easy to produce with a hidden joint. They are produced using a jig and drilling a hole at an angle into one workpiece. This is then joined to a second workpiece with a hardened steel self tapping screw. SPEED eliminates the need to pre drill the mating workpiece. STRENGTH screw acts as an internal clamp and is stronger than a biscuit, dowel or tenon. GRIP constant clamping force